Spudtech Forum
http://forum.spudtech.com/

Sprinkler valve not working
http://forum.spudtech.com/viewtopic.php?f=10&t=2310
Page 1 of 1

Author:  t.alleman [ Mon Oct 21, 2013 5:26 pm ]
Post subject:  Sprinkler valve not working

I just built my first pneumatic cannon. When I try to air it up, the air goes straight through the valve and out the barrel. I used a rainbird CP-100 valve and modified it with a blowgun. What did I do wrong?

Author:  Spudtech [ Thu Oct 31, 2013 12:18 pm ]
Post subject:  Re: Sprinkler valve not working

My first guess would be that you have the valve backwards or there is a leak somewhere.
Orbit valves have arrows that indicate flow direction. I think your rainbird valve may also have arrows.
If it is installed in the correct direction then there must be a leak somewhere.
Did you remove the solonoid? If so you need to be sure to plug the hole with epoxy or something otherwise the valve will not close properly.

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/