Spudtech Forum

2X4 Cannon test
Page 1 of 1

Author:  rwpresley [ Sat Jun 09, 2012 1:16 pm ]
Post subject:  2X4 Cannon test

I'm building a 2X4 cannon to shoot a 15 lb 2X4 at 100 MPH. Using a Supah Valve and an 11 Gal bead seater with a 2" outlet. We got the 2x4 to 61 mph at 75 psi and a loose fitting plug. Here's the 1st test. The cannon is behind a tree. Testing again today at 100 psi with a tight fitting plugImage

Author:  rwpresley [ Sun Jun 10, 2012 5:21 am ]
Post subject:  Re: 2X4 Cannon test

The cannon did the job. Violent destructive fun. Fired from the back of a truck. The Supah Valve with electric firing was the key. Cost about $400.

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group