| Author |
Message |
|
Spudtech
|
 Posted: Sun Jul 06, 2003 8:00 pm |
|
 |
| Site Admin |
Joined: Sun Feb 12, 2012 1:19 am
Posts: 10742
|
|
Originaly posted by wildone06,can anyone tell me how to make a souped up version of the 1 in rainbird sprinkler valve
|
|
  |
|
 |
|
Spudtech
|
Posted: Sun Jul 06, 2003 8:00 pm |
|
|
| Site Admin |
Joined: Sun Feb 12, 2012 1:19 am
Posts: 10742
|
|
Originaly posted by aXvXiA,Is it a straight-through or an anti-siphon one?
|
|
| |
|
|
|
Spudtech
|
Posted: Sun Jul 06, 2003 11:00 pm |
|
|
| Site Admin |
Joined: Sun Feb 12, 2012 1:19 am
Posts: 10742
|
|
Originaly posted by wildone06,.
|
|
| |
|
|
|
Spudtech
|
Posted: Mon Jul 07, 2003 11:00 am |
|
|
| Site Admin |
Joined: Sun Feb 12, 2012 1:19 am
Posts: 10742
|
|
Originaly posted by aXvXiA,I don't have the link handy, but I'm sure someone on here does because I've seen it pop up every once in a while.
|
|
| |
|
|
|
Spudtech
|
Posted: Mon Jul 07, 2003 12:00 pm |
|
|
| Site Admin |
Joined: Sun Feb 12, 2012 1:19 am
Posts: 10742
|
|
Originaly posted by robbie,http://geocities.com/tbrown111083/sprinklervalvesoupup.htm
|
|
| |
|
|
|
Spudtech
|
Posted: Mon Jul 07, 2003 10:00 pm |
|
|
| Site Admin |
Joined: Sun Feb 12, 2012 1:19 am
Posts: 10742
|
|
Originaly posted by wildone06,thats not a rain bird valve
|
|
| |
|
|
|
Spudtech
|
Posted: Tue Jul 08, 2003 11:00 am |
|
|
| Site Admin |
Joined: Sun Feb 12, 2012 1:19 am
Posts: 10742
|
|
Originaly posted by andeh,
|
|
| |
|
|
|
Spudtech
|
Posted: Tue Jul 08, 2003 1:00 pm |
|
|
| Site Admin |
Joined: Sun Feb 12, 2012 1:19 am
Posts: 10742
|
|
Originaly posted by wildone06,
|
|
| |
|
|
|
Spudtech
|
Posted: Wed Jul 09, 2003 5:00 pm |
|
|
| Site Admin |
Joined: Sun Feb 12, 2012 1:19 am
Posts: 10742
|
|
Originaly posted by wildone06,where can the hose fitting be drilled in so that it wil work
|
|
| |
|
|
|
Spudtech
|
Posted: Wed Jul 09, 2003 9:00 pm |
|
|
| Site Admin |
Joined: Sun Feb 12, 2012 1:19 am
Posts: 10742
|
Originaly posted by Bartman007,Follow the instructions that were already posted in reply to this question  As other people have posted Tim Brown's Guide to Souping Up Sprinkler Valves it is the same idea as demonstrated, even though the example valve is not a RainMaster. I hate to say it, but if you are so clueless that after receiving so much help, you still don't know where to put the hosebarb, then maybe you shouldn't own/build a spudgun in the first place. Just use common sense, put the hosebarb in a position where it will not block the spring, or any existing parts of the mechanism. All the hosebarb/hose/blowgun does it exhaust the airpressure forcing the diaphram down. If this post does not help you, I suggest you give up and continue operating the valve through the solenoid, or order a pre-converted valve from Joel. Peace, -Bartman007
|
|
| |
|
|
|
