Spudtech Forum
http://forum.spudtech.com/

Constant Pressure Sniper Cannon
http://forum.spudtech.com/viewtopic.php?f=38&t=2155
Page 1 of 2

Author:  Spudtech [ Fri Jul 25, 2003 6:00 pm ]
Post subject:  Constant Pressure Sniper Cannon

Originaly posted by SnipaKilla,
Hey all you out there,
I am working on making a constant air cannon that will be run off of regulated co2 and will be embedded into a rifle stock. I have seen this done w/ a ball valve, but I am wanting to make it w/ a solenoid sprinkler valve. And, I am planning on making it a bolt action. Have any of you tried this or have any suggestions on how to make the bolt work. Oh...and will a rainbird 24v anti-siphon sprinkler valve be able to withstand a constant 80 to 100 psi from co2?
Thanx for the help.
~SnipaKilla

Author:  Spudtech [ Fri Jul 25, 2003 7:00 pm ]
Post subject:  is it for paint ball?...NT

Originaly posted by someguynamedchris,
if some one writes some thing in the text feild but in the title thereis a NT is it still a NT?


Author:  Spudtech [ Fri Jul 25, 2003 7:00 pm ]
Post subject:  yea

Originaly posted by SnipaKilla,
yea, me and my friends are going to be doing some long rec ball games and i wanted to make a cannon that could shoot like 10 to 15 balls at once, and be able to sling it over my shoulder and reload it quickly.

Author:  Spudtech [ Fri Jul 25, 2003 7:00 pm ]
Post subject:  yea

Originaly posted by SnipaKilla,
yea, me and my friends are going to be doing some long rec ball games and i wanted to make a cannon that could shoot like 10 to 15 balls at once, and be able to sling it over my shoulder and reload it quickly.

Author:  Spudtech [ Fri Jul 25, 2003 7:00 pm ]
Post subject:  I think i know what you are talking about...

Originaly posted by someguynamedchris,
if you go to this page but you have to go down about 1/4 the way.

http://www.armoredfistpaintball.com/tank_news.htm

Chris

Author:  Spudtech [ Fri Jul 25, 2003 8:00 pm ]
Post subject:  It's been done MANY times....

Originaly posted by thehalls,

Go to warpig.com, click on resources, click on tank_talk and have at. Most of the guns are vehicle mounted so there's only so much applicability for you. But you'll really want to talk to a guy who goes by LCT_Paintball. He's built pretty much what you're saying as a handheld pump action. The result looks a LOT like the....uh...I forget the designation but....the grenade launcher carried by US troops in Vietnam.

Author:  Spudtech [ Fri Jul 25, 2003 10:00 pm ]
Post subject:  heres a pic of what im wanting to build.

Originaly posted by SnipaKilla,
Follow the link and it'll show the basic design, but instead of using a ball valve like this guy did, i want to make it a solenoid. Any suggestions?

http://members.fortunecity.co.uk/madpaint/alt/006_launcher_with_stock.html

Author:  Spudtech [ Sat Jul 26, 2003 6:00 pm ]
Post subject:  As I said, talk to LCT_Paintball at warpig. NT

Originaly posted by thehalls,
.

Author:  Spudtech [ Sun Jul 27, 2003 8:00 pm ]
Post subject:  i made a rifle, it's wicked,,,

Originaly posted by SpudEngineerscomp,
http://alexsterling.tripod.com/sniper

Author:  Spudtech [ Sun Jul 27, 2003 10:00 pm ]
Post subject:  No offense, but...

Originaly posted by SnipaKilla,
Isnt this supposed to be a spud cannon forum? Why should I have to talk to someone from Warpig, when I cant just ask it here instead??????
~SnipaKilla

Page 1 of 2 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/