Spudtech Forum

Originaly posted by corncob909,
enless im doing my math wrong (which i porbably am) then i disagree with the volume calculations for the reservoir on ggdt. It gave me a volume of 400.55 when i entered in the info about my 4 inch (ID) 120" long chamber, i put 4.5" for the OD which i know is wrong but still! This cant be right, and also why does the outside diameter of the pipe affect the volume of the chamber? Could some1 else with this program take a look at it and try what i am talking about, it must be me, my math, my computer, or my download but something is wrong. tell me what you come up with for the volume and see if the OD changes the volume on yours too, ( am i just missing what this is measuring or what?)

-thanks for any help, and plz correct me if i am so horribly off and wrong. :-)

Originaly posted by corncob909,

Originaly posted by pacogoatboy,
outer diameter=inner diameter of chamber
inner diameter=outer diameter of any pass through barrel or similar cylindrical obstruction inside of the chamber

they could have named the variables a bit more clearly though, couldn't they?

Originaly posted by boogieman,
lol sounds like a rap or something...

the od is the inside of your chamber, the id is the barrel, for coaxial guns, where the barrel is inside the chamber.

Originaly posted by boogieman,
unless you have a coaxial, leave the id at zero...

Originaly posted by pacogoatboy,
I SAID NO TEXT, DANG IT! GO AWAY!

Originaly posted by thehalls,
.

Originaly posted by thehalls,
OD = outter diameter of the volume of air.

ID = inner diameter of the volueme of air.

:)

Originaly posted by corncob909,
yes i guess that makes since, just thinking along different lines. Thanks