| Author |
Message |
|
Spudtech
|
 Posted: Sat May 24, 2003 10:00 am |
|
 |
| Site Admin |
Joined: Sun Feb 12, 2012 1:19 am
Posts: 10742
|
|
Originaly posted by bryce,ok i have my gun and it has a five foot barrel, and a 1 foot chamber. in the chamber i have a 3x3x2 conector which i have turn the angled down prat towards the barrel. and have instaled the clicker on a 2inch incap and screwed it on the gun. is that a bad place to put it? cuz it makes it so you can hold it to your shoulder like a real gun.
|
|
  |
|
 |
|
Spudtech
|
Posted: Sun May 25, 2003 5:00 pm |
|
|
| Site Admin |
Joined: Sun Feb 12, 2012 1:19 am
Posts: 10742
|
|
Originaly posted by spudmasterofMtWashington,nt
|
|
| |
|
|
|
Spudtech
|
Posted: Thu May 29, 2003 7:00 pm |
|
|
| Site Admin |
Joined: Sun Feb 12, 2012 1:19 am
Posts: 10742
|
|
Originaly posted by andeh,Anyway, if you can lay it down and press the button.. it PROBABLY isn't a good place. Just to be safe, I'd install a safety switch into one of the ignitor's wires.
|
|
| |
|
|
|
Spudtech
|
Posted: Fri Jun 13, 2003 11:00 pm |
|
|
| Site Admin |
Joined: Sun Feb 12, 2012 1:19 am
Posts: 10742
|
|
Originaly posted by Cpace,well we usually put in the end, so theres enough room for the pressure to build up. whatever, it works good.
=cpace=
|
|
| |
|
|
|
Spudtech
|
Posted: Fri Jun 20, 2003 5:00 pm |
|
|
| Site Admin |
Joined: Sun Feb 12, 2012 1:19 am
Posts: 10742
|
|
Originaly posted by spudmasterofMtWashington,sorry I am getting tired of coming back to the forum after a 2week vacation and finding all this crap posted here by one person!
|
|
| |
|
|
|
