Spudtech Forum
http://forum.spudtech.com/

Pressure...
http://forum.spudtech.com/viewtopic.php?f=44&t=1832
Page 1 of 1

Author:  Spudtech [ Tue Jul 01, 2003 7:00 pm ]
Post subject:  Pressure...

Originaly posted by clickman,
I'm in a little dilema. I'm using the tutorial on the site, "Build Your Own". I can only get my hands on 4" non-pressure rated. (I checked both Lowes and Home Depot. Home depot only does really large 10 foot pieces, Lowes I was able to get pressure rated 1.5" but non-rated 4" for the chamber. So, what should I do?

Author:  Spudtech [ Tue Jul 01, 2003 7:00 pm ]
Post subject:  Mods delete this thread :(

Originaly posted by clickman,
Odd. Using Opera 7, I hit back one too many times and it re-submitted.

Author:  Spudtech [ Tue Jul 08, 2003 8:00 am ]
Post subject:  Pressure rated (sch40/sch80)

Originaly posted by IzzyDoesIt,
You'll want to use at least sch40 for your chamber. Most home supply stores carry sch40 only on 2" and below sizes. You need to go to a plumbing supply or visit mcmaster.com for your supplies.
Note: For your own safety and those around you, DEFINATELY Do Not use cellular core for your chamber!
I.D.I

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/