Spudtech Forum http://forum.spudtech.com/ | |
Supah Valve Repair http://forum.spudtech.com/viewtopic.php?f=5&t=2258 |
Page 1 of 1 |
Author: | zipmatt77 [ Wed May 02, 2012 12:45 pm ] |
Post subject: | Supah Valve Repair |
I have had my supah valve a while now, the tee has cracked around the screws in the back, and the piston inside has also broken. Do you do repairs and or sell a replacement kit to fix the valve??? |
Author: | zipmatt77 [ Sat May 05, 2012 9:29 am ] |
Post subject: | Re: Supah Valve Replacement Kit |
I know and understand I will have to send in the broken valve, but what will happen if it cannot be repaired? Will you replace it with a working valve for the 60 dollar repair price still? As you said, 2 of the main parts are broken, the tee itself and the piston. Oh and just so you know, I also have one of launch potatoes "mauler" valves and the supah valve wipes the floor with it. The supah valve is the most powerful pvc made valve I have ever gotten my hands on!!!! |
Author: | Spudtech [ Sun May 06, 2012 1:50 am ] |
Post subject: | Re: Supah Valve Replacement Kit |
Oops I deleted my original post when I was trying to delete your duplicate post. I will try to replace the info with this one. ![]() Each valve can be a little different so I can't offer repair kits yet. Your valve will need to be sent in to be repaired. Use the Supa Valve repair item in the Spudtech on-line store to get your valve repaired. This is a new service to take care of existing customers. I will make any new parts that are needed and reuse as many old parts as I can. Your valve will mostly be new because of the broken piston and body. New rings and a new piston seal are also included. Not many old parts left. ![]() Be sure to return all the original parts (including the sprinkler valve and trigger valves if they apply to your model) so it can be tested as a complete unit before it is returned. I'm glad to hear the Supah out performs the Mauler. I have not had the opportunity to compare myself. I test every valve in the shop before shipping them. Each time I test a Supah plus the raw power still surprises me and puts a smile on my face. ![]() |
Author: | zipmatt77 [ Sun May 06, 2012 7:29 am ] |
Post subject: | Re: Supah Valve Repair |
Awesome, that is what I wanted to hear. I will get it out to you this week. I was only using a 1/4 inch ball balve to trigger it so I will include that when I ship it out. Thank you so much in advance for taking care of this!! ![]() ![]() ![]() |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |